Request an offer

3D laser scanning and production of BIM Revit model as a basis for anti-seismic building reconstruction

go2bim | 10. June 2021.

A strong earthquake (6,2 on Richter scale) hit the area of Petrinja and Sisak on December 29, 2020. It damaged many buildings downtown so an urgent reconstruction began. Considering that these are older buildings, many problems arose for the engineers, all centered on the fact that there is no previous project documentation upon which reconstruction can be based.

GO2BIM uses 3D laser scanning method and creates BIM models which serve as a basis for further documentation related to reconstruction, statics and similar.

Engineering project office projekt2 hired GO2BIM to produce complete project documentation based on architectural footage of building’s current condition. This is then integrated by several digital tools and used as a unique building overview system.

Laser scanning and 3D BIM model

Three Faro laser scanners were used in order to scan the interior and exterior of the building, while the roof was scanned by a drone using photogrammetric method. Field scanning produced 205 scans and 73 drone pictures, all of them done within a day. Post processing was also done within a day, and since we have three scanners at our disposal, we may conclude that highly complex activities were done within a short period of time.

We completed the BIM Revit model within 132 working hours.

This model was made on LOD 300 (LOD = Level of Detail) and it encompasses all the information on the current condition of the building which is needed by the architects and structural engineers.

3D Lasers scan of building damaged in earthquake from GO2BIM on Vimeo.

Speed, precision and quality

We have delivered complete BIM project documentation on the existing condition to our partner within seven days.

The produced point cloud serves as a basis for production of high-quality and precise 3D BIM model.

In the end we may conclude that we are glad to have helped PR2 with the challenges they came across and to have made their jobs easier. We hope this is a basis for successful further cooperation!

 

Optimization of processes and budgets is only the beginning of a highly complex restoration project. Should you need an advice during one of the phases, we are at your disposal. We help our clients and consider our consulting services to be very important.

 

If you are facing reconstruction challenges and are looking for reliable partners who specialize in laser scanning and 3D BIM models, contact us and we will be happy to help you.

Contact info

GO2BIM ltd., Don Boscova 10

10 000 Zagreb

CROATIA

Office

Graberje 18B,

42000 Varaždin,

Croatia

go2bim@go2bim.hr

PIN: 05071460297

VAT NUMBER: HR05071460297

ERSTE&STEIERMÄRKISCHE BANK d.d.

IBAN: HR1724020061100871055

SWIFT: ESBCHR22

go2bim go2bim go2bim go2bim
go2bim go2bim go2bim go2bim

The project was co-financed by the European Union from the European Regional Development Fund. The content of this material is the sole responsibility of GO2BIM d.o.o.

The company is signed into a court registrar at Commercial court in Zagreb, MBS:080182165, under the number
Tt-14/1935-4. Base capital: 20.000,00 HRK, paid in full.